Using Television (1Seg) - Hitachi W62H User Manual

Using Television (1Seg)

While the standby screen is
displayed, hold down f
for at least one second.
You need to perform an initialization
procedure before you can use au
Media Tuner. If you have not performed
initialization yet, refer to "Confi guring au
Media Tuner Initial Settings" (page 79).
When you start up au Media Tuner after
confi guring initial settings, the channel of
the mode you were viewing the last time
you used will appear.
Use L and R to change
the channel.
Use j in television operation screen
and h in data operation screen to
adjust the volume.
With EZ Channel-Plus, you can select a
program with s and then press c (再生)
(Play) to start playback.
◎ When you start up au Media Tuner, it may take some time to acquire
images and, especially in the case of a data broadcast, data. This is due
to the characteristics of digital broadcasts.
◎ In any mode, pressing R while the fi nal channel is displayed or L while
the fi rst channel is displayed will switch mode.
81