Hitachi W62H User Manual page 15

Connect the common AC adaptor 01/02 (option) to
the desktop holder.
Check the shape of the connectors to ensure they are aligned correctly before
you connect.
Trying to force a connection may damage the connectors.
Firmly insert the closed W62H into the desktop holder.
Hold the desktop holder, align the locking tabs of the desktop holder with the
slots on the sides of the phone, and push the phone against the holder until it
clicks. Do not attach by pressing the phone into the wrong direction by force.
Fold out the power plug of the common AC adaptor 01/02
(option), and then plug it into a 100V AC power outlet.
This will cause the W62H Charge indicator (LED) to light red, and
battery icon) to display. When charging is completed, the Charge indicator (LED)
will go out.
When removing the phone, hold the desktop holder, place a fi nger under
the fl at-type earphone-microphone jack cover, lift the phone straight upward,
unlock and pull forward.
※ You can connect the common AC adaptor 01/02 (option) to the W62H directly to
charge the battery pack.
Fully open the external connection jack cover, check
the shape of connectors and insert it horizontally.
(charging
13