Confi Guring Au Media Tuner Initial Settings - Hitachi W62H User Manual

Confi guring au Media Tuner
Initial Settings
Perform the following procedure before using au Media Tuner for the
fi rst time.
While the standby screen
is displayed, hold down
f for at least one
second.
Escape clause is displayed.
If you select "OK (以後表示しない)" (OK
(Do not display again.)), the display will
not appear in the future.
Use j to scroll the
screen to read its contents.
After you do, use j to
select "OK" and then press
c ( 選択 ) (Select).
A screen for confi guring au Media Tuner
initial settings will appear. Follow the
instructions on the screen to confi gure the
settings. After you fi nish the channel
setting screen will appear.
Use j to select " オート設
定 （放送波） " (Auto Setting)
and then press c ( 選択 )
(Select).
This automatically confi gures reception
area and channel settings, and displays
the television screen.
If you want to confi gure area settings
manually, select "マニュアル設定" (Set
Manually).
79