Features
Four Transformerless Microphone Inputs
•
Four Balanced Direct Outputs (XLR)
•
Balanced Left and Right Main Outputs (XLR)
•
Balanced Left and Right Control Room Outputs (XLR)
•
HPA2™ "0-Ohm" 1/4" TRS Headphone Output
•
Precision-Matched Monolithic Low-Noise Transistor Quads on Each Microphone Input
•
High-Current High-Speed Low-Capacitance Phantom Protection Circuits
•
Fully Protected Against Phantom Hot-Plug and Cable-Shorting Scenarios
•
Balanced Transformerless Inputs and Outputs
•
+48v Phantom Power Switch on Every Microphone Input
•
40 Hz High-Pass Filter Switch on Every Microphone Input (12 dB/octave)
•
20 dB Pad Switch on Every Microphone Input
•
Matched 41-Detent First-Stage Gain Controls on Every Microphone Input
•
60 dB Maximum First-Stage Gain, Adjustable to 70 dB
•
22 to 60 dB Gain (pad off), 2 to 40 dB (pad on)
•
+27 dBu Maximum Input Level (with pad), +7 dBu (without pad)
•
+29.5 dBu Maximum Output Level on all Balanced Outputs
•
+ 23.5 dBu Maximum Headphone Output Level
•
MirrorPan™ Low-Distortion Constant-Power Pan Controls (1 per input channel)
•
Solo Switches (1 per input channel)
•
Mono/Stereo Solo Switch for Flexible Monitoring
•
41-Detent Control Room/Headphone Level Control
•
41-Detent Main Output Level Control
•
Control Room "Mute on Headphone Insertion" Mode Switch (rear panel)
•
Intensity Modulated Signal Presence LEDs (Green - 4 on direct outputs plus 2 on main outputs)
•
+24 dBu Warning LED (Red – 4 on direct outputs plus 2 on main outputs)
•
Solo Warning LED (Yellow)
•
+48V Phantom Warning Indicators (Yellow - 1 per input channel)
•
Power LED (Blue)
•
Ultra-Quiet Linear Power Supply with Rear-Panel Input Voltage Selector
•
Complies with FCC and CE Regulations
•
RoHS Compliant
•
PRE420 Instruction Manual – rev. E
Page 6