PRODUCT SPECIFICATIONS
Motor ...............................................................19.2 Volt DC
No Load Speed ................................................11,000/min.
Planing Width ............................................................... 2 in.
Planing Depth..........................................................1/64 in.
DUST
BAG
DEPTH ADJUSTMENT
KNOB
KNOW YOUR PLANER
See Figure 1.
Before attempting to use this product, familiarize yourself
with all operating features and safety rules.
BLADE WRENCH
A blade wrench is included for convenience in changing
blades.
DEPTH ADJUSTMENT
The planing depth can be adjusted from 0 to 1/64 in.
DUST BAG
The dust bag attaches to the exhaust of the planer to
keep the work area free of debris. A 1-1/4 in. vacuum
hose can also be attached for dust collection.
SWITCH
TRIGGER
LOCK-OFF
BUTTON
KICKSTAND
FEATURES
Rabbet Depth ........................................................ 0-1/2 in.
Charger Input ................................... 120 V, 60 Hz, AC only
Charge Rate ............................................................. 1 hour
EDGE GUIDE/
RABBET GUIDE
EDGE GUIDE/RABBET GUIDE
The edge guide may be attached for planing edges and
making rabbet cuts.
KICKSTAND
The kickstand allows the planer to sit on a workpiece or
table without damaging the surface or the blades.
LOCK-OFF BUTTON
The lock-off button locks the switch trigger in the OFF
position when the switch is released.
REVERSIBLE BLADES
The blades installed on your planer can be reversed for
longer life between blade changes. An additional set of
blades is included.
8
BLADE
WRENCH
REVERSIBLE
BLADES
Fig. 1