1. Manuals
  2. Brands
  3. Craftsman Manuals
  4. Planer
  5. 351.217240
  6. Operator's manual

Craftsman 351.217240 Operator's Manual

4 1/8" bench top jointer/planer
Hide thumbs
Table of Contents

Advertisement

Available languages

Available languages

Quick Links

Enlarged version
Operator's Manual
CRRFTSMRN
41/8"
Bench Top
JOINTER/PLANER
Model No.
351.217240
CAUTION:
Read and follow
all Safety Rules and Operating
Instructions
before First Use
of this Product.
Sears, Roebuck and Co., Hoffman
Estates, IL 60179 U.S.A.
3741.01 Draft (03/05/99)

Advertisement

Table of Contents
loading

Related Manuals for Craftsman 351.217240

Summary of Contents for Craftsman 351.217240

  • Page 1 Operator's Manual CRRFTSMRN 41/8" Bench Top JOINTER/PLANER Model No. 351.217240 CAUTION: Read and follow all Safety Rules and Operating Instructions before First Use of this Product. Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A. 3741.01 Draft (03/05/99)
  • Page 2 CRAFTSMAN 4118" JOINTER/PLANER TOOL SHOULD BE MAINTAINED If this Craftsman Jointer/Planer fails due to a defect in material or workmanship within one year from the date • Always unplug tool prior to inspection.
  • Page 3 • Use recommended accessories (refer to page 13). Use of improper accessories may cause risk of injury to persons. Refer to Figure 2. • Handle workpiece correctly. Protect hands from pos- sible injury. ASSEMBLE TRUNNIONS TO FENCE ° Turn machine off if it jams. Blade jams when it digs The trunnion with scale is the left trunnion and the trun- too deeply into workpiece.

  • Page 4: Power Source

    Plug must be plugged into matching outlet that is =€-€- properly installed and grounded in accordance with all local codes and ordinances. Do not modify plug provided. If it will not fit in outlet, have proper outlet installed by a qualified electrician. Inspect tool cords periodically, and if damaged, have iosi repaired by an authorized service facility.

  • Page 5: Electrical Connections

    Maintain the proper relationships of infeed and out- DESCRIPTION feed table surfaces and cutterhead blade path. Craftsman 41/8 ' ' jointer/planer is used to surface the faces • Do not back the work toward the infeed table. and edges of boards, produce a flat surface on warped •...

  • Page 6: Depth Of Cut

    POSITIONING FENCE Replace or sharpen blades as they become damaged or dull. Refer to Figure 9. o Do not attempt to perform an abnormal or little used The fence can be adjusted to cut various angles from operation without study and the use of adequate hold- 0o-45 °...

  • Page 7: Adjusting Blade Height

    ADJUSTING BLADE HEIGHT AVOID DAMAGE TO BLADES Refer to Figures 10 and 11. Jointer/planer is a precision woodworking machine and should only be used on quality lumber. Using bad lumber CAUTION: Make sure the switch is in the "OFF" posi- could result in a poor quality cut on subsequent pieces.
  • Page 8 Feed the board at a continuous even rate of speed. Any hesitation or stopping could cause a "step" to be cut on the edge of the board. Figure 16- Feeding with Push Blocks Figure 13 - Feeding Workpiece • Grasp the hold-down/push-blocks firmly.

  • Page 9: Sharpening Blades

    Blade Clam WARNING: Turn the switch to "Off" position and Cutter unplug jointer/planer from power source before pro- Clamp ceeding to do maintenance work. CHECKING FOR WORN BLADES Condition of blades will affect precision of cut. If blade _Cutter Guard wear is not observed when checking the blade height, the quality of cut will indicate the blade condition.

  • Page 10: Replacing Timing Belt

    • If the spring is out of tension, it must be replaced. Keep blades sharp (see "Sharpening Blades," page Slide out spring from the dimple. Contact your near- 9). Sometimes replacing blades is less expensive est Sears store or service center for replacement. than resurfacing them.
  • Page 11 SYM PTO M CORRECTIVE ACTION POSSIBLE CAUSE(S) Motor does not start 1. Defective switch 1. Have switch replaced. 2. Defective motor 2. Have motor replaced/repaired. NOTE: 1 and 2 must be done by a qualified service technician; Consult Sears service. 3.
  • Page 12 Model 351.217240 Figure 23 - Replacement Parts Illustration for Jointer/Planer [J 49 48 48 3! 35 6...
  • Page 13 PART NO. DESCRIPTION QTY. PART NO. DESCRIPTION QTY. 3266.00 Infeed Table STD852006 6mm Lockwasher* 3267.00 Bracket 0351.00 6-1.0 x 10mm Set Screw 2663.00 0221.00 Spacer 3AMI-10 Retaining Ring 6461.00 STD315205 3CMI-8 E-Ring 6200ZZ Bearing* 9_73666 Push Block 5156.00 4mm Serrated Washer 5223.00 5-0.8 x 30mm Set Screw STD852004...
  • Page 14 GARANTIA COMPLETA DE UN ANO PARA EL evitar el uso no intencional de las herramientas mec_.nicas. CEPILLO MECANICO DE BANCO/CEPILLADORA ES NECESARIO MANTENER LAS HERRAMIENTAS DE 10,5 CM CRAFTSMAN • Siempre desenchufe la herramienta antes de inspeccionarla. Si el cepillo mec_.nico de banco/cepilladora falla dentro de un afio •...
  • Page 15 • No fuerce la herramienta. Funciona m_.s eficientemente a la El cepillo mec_.nico de banco/cepilladora se envia completo velocidad para la que fue dise_ada. una caja de cartdn e incluye las patas de acero. Antes del monta- je, es necesario encontrar y contar las partes...
  • Page 16 • AsegQrese que haya suficiente lugar para mover la pieza de El enchufe de conexidn a tierra tiene que enchufarse directa- trabajo a trav6s de todo el corte. Tiene que haber suficiente mente en un receptAculo del tipo de conexidn a tierra de tres espacio de modo que ni los operadores...
  • Page 17 El cepillo mec_.nico de banco/cepilladora de 10,5 cm Craftsman se usa para nivelar las caras y bordes de tablas, producir superfi- CORDONES DE EXTENSION cies planas...
  • Page 18 • No cepille para empalmar para el espesor deseado en mate- • Mida desde la superficie de la mesa de entrada hasta la parte riales con una Iongitud de menos de 15,56 cm, con un ancho inferior del borde recto. Esta ser4t la profundidad del corte.
  • Page 19 PROTECClON DE LA CUCHILLA Lado posterior de la herramienta La protecci6n de la cuchilla protege el portacuchillas. Siempre debe estar puesta y debe funcionar correctamente. Inspeccione la protecci6n para asegurarse de que funciona Borde recto_ rrectamente. Para revisarla, observe los pasos a continuaci6n: •...
  • Page 20 Para desactivar el mecanismo de bloqueo: Alimente la tabla segQn la veta cuando sea posible. • Inserte y presione la Ilave del interruptor en la ranura del interruptor. Rotaci6n Interruptor __r-_ Llave del interruptor Rotaci6n Figura 12 - Interruptor ON-OFF (Encendido-Apagado) Figura 15 - Direccibn de la alimentacibn ADVERTENCIA: AsegQrese...
  • Page 21 TAREAS DE BISELADO Y CHAFLANADO • SitQe la mesa de entrada de manera que la piedra haga con- tacto con la cuchilla a Io largo de su superficie biselada. Refierase a la Figura 17. • Pase la piedra a Io largo de la cuchilla, avanzando de un lado •...
  • Page 22 • Apriete los tornillos de fijacidn de la cuchilla. • Verifique nuevamente el ajuste de la cuchilla y asegtJrese que la misma est6 atJn nivelada con la mesa de salida. • Repita el procedimiento para cambiar la otra cuchilla. • Retire el trozo de madera y suelte la proteccidn de la cuchilla.
  • Page 23 SINTOMA MEDIDA CORRECTIVA CAUSA(S) POSIBLE(S) El motor no arranca 1. Interruptor defectuoso 1. Cambie el interruptor. 2. Motor defectuoso 2. Cambie/repare el motor. AVISO: Un t6cnico de servicio calificado tiene que hacer 1 y 2; consulte al centro de servicios de Sears.
  • Page 24 For the repair or replacement parts you need delivered directly to your home Call 7 am - 7 pm, 7 days a week 1-800-366-PART (1-800-366-7278) Para ordenar piezas con entrega a domicillo - 1-800-659-7084 For in-home major brand repair service Call 24 hours a day, 7 days a week 1-800-4-REPAIR (1-800-473-7247)

Table of Contents