Mazda speed 6 2007 Manual page 152

Driving Your Mazda
Starting and Driving
WARNING
Keep the ON/OFF switch off when
cruise control is not in use:
Leaving the ON/OFF switch on when
not using the cruise control is
dangerous as you may hit one of the
other buttons and put the vehicle in
cruise control unexpectedly. This
could result in loss of vehicle control.
qTo Set Speed
1. Activate the cruise control system by
pressing the ON/OFF switch.
2. Accelerate to the desired speed, which
must be more than 30 km/h (19 mph).
3. Press the SET/COAST button and
release it at the speed you want.
Release the accelerator at the same
time.
Don't continue to hold in the button. Until
you release it, speed will continue to drop
(unless you continue to accelerate) and
you'll miss the desired speed.
5-14
NOTE
The SET function can't be activated
l
until about 2 seconds after the ON/
OFF switch has been engaged.
On a steep grade, the vehicle may
l
momentarily slow down going up or
speed up while going down.
qTo Increase Cruising Speed
Follow either of these procedures.
Press the RES/ACCEL button and hold
l
it. Your vehicle will accelerate.
Release the button at the speed you
want.