Makita GA7012C Instruction Manual page 11

• The declared vibration emission value has been measured
in accordance with the standard test method and may be
used for comparing one tool with another.
• The declared vibration emission value may also be used in
a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the power tool
can differ from the declared emission value depending on
the ways in which the tool is used.
• Be sure to identify safety measures to protect the operator
that are based on an estimation of exposure in the actual
conditions of use (taking account of all parts of the operat-
ing cycle such as the times when the tool is switched off
and when it is running idle in addition to the trigger time).
For European countries only
EC Declaration of Conformity
We Makita Corporation
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Angle Grinder
Model No./ Type: GA7012C, GA9012C
are of series production and
Conforms to the following European Directives:
98/37/EC until 28th December 2009 and then with
2006/42/EC from 29th December 2009
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
The technical documentation is kept by our authorised
representative in Europe who is:
Makita International Europe Ltd.
Michigan Drive, Tongwell,
Milton Keynes, MK15 8JD, England
24th June 2009
Tomoyasu Kato
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, JAPAN
as the responsible
Director
ENG901-1
ENH101-13
11