Muratec Office Bridge IF-200 Operating Instructions Manual page 29

IF-200 from Muratec
SETTING
E-mail Size
Confirmations
Use Fax# for E-Mail
Error Retries
Error Wait (mins)
Fax Units
Fax Encoding
Bit Fill Order
Dial Digit Timeout
(secs)
28
OPTIONS AND DESCRIPTION (Default settings are in BOLD
type)
4096. Limit to set on size of e-mail in kilobytes. Some ISPs limit
e-mail size.
Yes, No. Whether or not you want confirmation when an Internet
fax is read by the recipient.
The recipient must be receiving e-mail through an IF-200
NOTE:
for this feature to work. This setting is applied to each
phone book entry individually. The phone book entry
initially takes on the value to which this field is set when
the entry is created, but the value can be changed by
editing the phone book entry.
Yes, No. When a fax number is dialed on the fax machine, the IF-
200 can do a search for that fax number in the phone book and if
found (in the Direct # field), send the fax to the corresponding e-
mail address or it can send the fax conventionally to the fax
number dialed.
If this field is set to Yes, a fax can still be sent
NOTE:
conventionally by dialing
Sending a Fax). This setting is applied to each phone book
entry individually. The phone book entry initially takes on
the value to which this field is set when the entry is
created, but the value can be changed by editing the phone
book entry.
5. Set the number of retries before the IF-200 stops dialing a
number.
1. Number of minutes to wait before redialing with any other
error.
INCHES, METRIC. The units used to store fax data.
Modified Modified READ (MMR), Modified Huffman (MH).
The encoding method used to store fax data. MMR is more
compact than MH.
LSB First, MSB First. Unless you understand the internals of
TIFF and need to modify this field, do not change it from its
default setting.
6. Time to wait between digits dialed on fax machine before the
number is deemed complete.
fax number (see Section 4,
# #