D-Link DVG-2032S User Manual page 41

DVG-2032S/2016S User's Manual
Enable Call Feature Code
Enable Call Feature Code: Check the box to enable the advanced function for Call Features, such as Call
Pickup, Automatic Redial and Unattended transfer.
Calling Feature Instructions:
Call Hold: The call will be held after the FLASH button is pressed on the phone set. The VoIP Gateway will
play music on hold (provided by your ITSP or VSP) to the remote end.
Call Transfer: The call will be held after FLASH button is pressed on local phone set (the VoIP Gateway
plays on-hold music to the remote end). Meanwhile, the local user can dial out another number after the dial
tone is heard. After the handset is on-hooked, the call originally on hold will then be transferred to the new
number regardless the status of the new call. If wrong number is dialed for the new call, press the FLASH
button will switch back to the call on hold. Also, if the local user doesn't hang up the phone after the new call
is set up, press the FLASH button will switch between the original call and the new call. Please note that the
PBX between phone sets and the VoIP Gateway must support FLASH features in order to use this function.
If a phone set is connecting directly to the FXS port of the VoIP Gateway and the FLASH button does not
function, please adjust the settings in "Flash Detect Time" from "Advanced Options" section.
Note: The availability of the above features also depends on your VoIP network. Please also check with
your service provider for these services.
D-Link Systems, Inc.
VoIP Gateway Configuration
41