Additional Functions - Zanussi ZOP37902 User Manual

Setting the DURATION or END
1. Press again and again until the display
shows or
or flashes in the display.
2. Press or to the set the values and
press to confirm.
For Duration first you set the minutes and
then the hours, for End
hours and then the minutes.
An acoustic signal sounds for 2 minutes after
the time ends. or
setting flash in the display. The oven stops.
3. Turn the knob for the oven functions to the
off position.
4. Press any button or open the oven door to
stop the acoustic signal.
If you press
hours for DURATION
appliance goes to setting of the
END function.
Setting the MINUTE MINDER
1. Press again and again until
flash in the display.
2. Press or to set the MINUTE
MINDER.
First you set the seconds, then the minutes
and then the hours.

Additional functions

Using the Child Lock
The Child Lock prevents an accidental
operation of the appliance.
If the Pyrolysis function operates, the
door is locked.
SAFE comes on in the display when
you turn a knob or press a button.
1. Do not set an oven function.
2. Press and hold
for 2 seconds.
An acoustic signal sounds. SAFE comes on in
the display.
To deactivate the Child Lock, repeat step 2.
www.zanussi.com
.
first you set the
symbol and time
when you set the
, the
and "00"
and at the same time
At first, the time is calculated in minutes and
seconds. When the time you set is longer
than 60 minutes, the symbol
in the display.
The appliance now calculates the time in hours
and minutes.
3. The MINUTE MINDER starts automatically
after five seconds.
After 90% of the set time, an acoustic
signal sounds.
4. When the set time ends, an acoustic signal
sounds for two minutes. "00:00" and
flash in the display. Press any button or
open the oven door to stop the acoustic
signal.
If you set the MINUTE MINDER
when the DURATION or END
function operates, the symbol
comes on in the display.
Count Up Timer
Use the Count Up Timer to monitor how long
the oven operates. It is on immediately when the
oven starts to heat.
To reset the Count Up Timer, press and hold
and . The timer starts to count up again.
The Count Up Timer cannot be used
with the functions: Duration
End .
Residual heat indicator
When you deactivate the appliance, the display
shows the residual heat indicator
temperature in the oven is more than 40 °C.
Turn the knob for the temperature left or right to
show the oven temperature.
Automatic Switch-off
For safety reasons the appliance deactivates
automatically after some time if an oven function
operates and you do not change any settings.
comes on
,
if the
9