Note the following points:
• If the SERV indicator does not come on, you have
lost contact with the EDACS system and cannot,
therefore, place or receive any calls. Refer to
Appendix 1 for further information.
PLACING AN INDIVIDUAL CALL
1.
Press the
you wish to call. These digits are shown in the
second line of the display.
If you enter a wrong digit or a wrong LID:
Erase a wrong digit by pressing the
mentarily. You may delete all wrong digits indi-
vidually like this, or eliminate all entered digits by
holding the
you are not in a call, pressing the
delete all entered digits.
2.
After you have entered the LID, press the [PTT]
key. The text *INDV* will appear on the first line
of the display after the system acknowledges the
call.
3.
When the conversation is finished, press the
key.
8
key followed by the LID of the unit
+
key for approximately 1 second. If
+
key mo-
-
key will also
-