Audible Signals; Ringing Signal - Ericsson EDACS IPE Series User Manual

CALL DENIED
If after pressing
heard and the word DENIED appears on the display,
this indicates that the system has denied your re-
quest. This happens when either the caller or callee
unit LIDs are not valid on the system.
OUT OF RANGE/SYSTEM INOPERATIVE
5
If the radio is searching for a channel when PTT or
5
is pressed, a single tone sounds immediately after
the key or PTT button is pressed indicating the
radio is out of range of the repeater. Otherwise the
radio tries to place the call for a short period (3
seconds) after the initial attempt. If it cannot then
reliably communicate with the system, the radio gen-
erates a low pitched tone and displays NO ACCESS
when it gives up trying to place the call. The system
is off the air or the radio needs servicing when the
radio is within calling range, and these tones are
heard. Observe the SERV icon and the CC SCAN
display to determine when the system is in range
and/or operational again.

AUDIBLE SIGNALS

Ringing Signal

The ringing signal sounds when a call is received. It
will be repeated until the call is answered or is terminated
by the system.
There is a special function to allow you to set the
volume of the ringing signal. The ringing volume can be
24
5
key or PTT button a short tone is