FAULT TRACING
No Power to the Radio
-
• If the radio does not come on when you hold down
the
to paragraph Batteries and Recharging .
SERV Indicator Does Not Come On
You have lost contact with the EDACS system and
you cannot place any calls. The reason for this is either:
• The received signal is too weak. See the next
section, Received Signal is Weak
• You are in an area which is not covered by the
EDACS system selected.
Received Signal is Weak
If the radio displays CC SCAN often, move the radio
to obtain a stronger signal.
• Large obstacles such as buildings, hills and moun-
tains can drastically affect the signal strength and
you may have to move to obtain a sufficiently
strong signal.
• Indoors, it is usually best to use the radio near a
window.
APPENDIX 1
key, recharge or replace the battery. Refer
51