Answering An Individual Call; Placing An Interconnect Call - Ericsson EDACS IPE Series User Manual

ANSWERING AN INDIVIDUAL CALL

When you are being called, the radio will beep every
5 seconds to alert you of the incoming call and will
continue until any key is pressed. The backlight flashes
while the word ICALL and the calling unit's LID flash in
the display.
Press the [PTT] key to return the call, the flashing will
stop. The TX and BSY symbols will turn on while trans-
mitting. When the conversation is finished, press the
key.
Unanswered ICALLS will cause the WHC symbol to

flash. The LID of the calling radio can be recalled by
pressing

PLACING AN INTERCONNECT CALL

1. Enter the desired number on the numeric keys.
The digits are shown in the display.
If you enter a wrong digit or a wrong number:
Erase a wrong digit by pressing the
mentarily. You may delete all wrong digits indi-
vidually like this, or eliminate all entered digits by
holding the
10
twice.
+
key for approximately 1 second. If
-
+
key mo-