Changing a Recalled Number
A telephone number recalled from the memory can
be altered by erasing the last digits using the
then entering new digits.
SPEED CALLING
A stored number can be called by just entering the
memory location (one or two digits) and pressing
number appears in the display.
If you called a wrong number, you can press
before the call has been connected.
ERASING A STORED NUMBER
A stored number (and name) will be erased automat-
ically if you store a new number in the same location.
However, you can erase a number without replacing with
a new number, by proceeding as follows:
1.
Press
ond to erase any entered digits.
2.
Press
3.
Enter the desired location, for example 22. Press
M
. The warning message USED flashes for 5
seconds.
34
+
key and hold for approximately 1 sec-
M
>
. Press
to scroll to RECALL-- .
+
key, and
5
. The
-