Table of Contents
Advertisement
Basic Operations
Turning On/Off the Power
Turning On
Insert the power cord into the wall outlet. Press the Power Switch on the unit to power on.
If the unit is in standby mode, press SOURCE on the unit or Power
you will be ready to use its features.
Turning Off
With the power on, press the Power button on the remote control to turn off the unit, and put the unit in standby mode. To
cut off the power completely, press the Power Switch directly.
First Time Setup
The first time you use the TV, you need to set up the TV.
1
Make sure that:
You have installed the batteries in the remote control.
!
You have connected the TV to an antenna or cable TV outlet.
!
You have connected the power cord.
!
2
Press POWER
to turn on the TV. After a few seconds
the Energy Save Mode screen opens.
3
Press 3
or4
to select Standard/Energy Save or
Store/Dynamic. Press OK to confirm the selection.
4
Now the Installation Guide screen will display.
Highlight Language item, press 3
desired OSD language.
5
Press 5
or6
to select Auto Tuning item, and press OK to
confirm the selection.
6
Now a pop-up screen opens. Press 3
country according to your local area, and then press 6
to highlight Start item, and press OK to begin the auto
channel search.
(Continued)
or4
to select a
or4
to select a proper
button on the remote control to turn on the unit, and
Energy Save Mode
To use this TV for displaying in a store, please select [Store/Dynamic].
[Standard/Energy Save] mode is recommended for normal home use.
Standard/Energy Save
Navigate
Language
Auto Tuning
Language
Auto Tuning
or OK
Language
Auto Tuning
15
Store/Dynamic
Confirm
OK
Installation Guide
English
Start
OK
Exit
Installation Guide
English
Start
OK
Exit
Installation Guide
Country Selection
New Zealand
English
Start
Cancel
Start
OK
Exit
Exit
Exit
Exit
Hide quick links:
Advertisement
Table of Contents
