Sanyo LCD-32XR56DZ Instruction Manual page 10

Identification of Controls
Main Unit (rear view)
1
2
3
4
5
6
7
8
1. HDMI 1 / 2 interface
To connect with those equipments with HDMI or DVI interface, for example, Set-top box or DVD player. (A
HDMI-to-DVI adapter cable is required when you are connecting a DVI-equipped device to this TV.)
2. D-SUB input
Connect to the D-SUB/AUDIO output jack on your computer.
3. COMPONENT inputs
Connect to the audio and component output jacks of a DVD player or Set-Top Box.
4. AV1/AV2 inputs (S-Video, Video, Audio L, R)
Receive video/audio signal from external sources such as VCR or DVD player.
5. RS232 interface
For service use . The user cannot operate the unit through this terminal.
6. Antenna input
Connect to your cable system or outdoor antenna.
7. S/PDIF digital audio out terminal(coaxial)
Connect to the digital audio input of a digital audio component.
8. AC Power input
Connect to AC power cord.
9. Headphone jack
Connect to your headphones.
10. USB port
For software upgrade only. The user cannot use it.
11. AV outputs (Video, Audio L, R)
Connect to your VCR to record programs.
(Continued)
TV Left Side
7
TV Right Side
9
10
11
4