EDI TSG-416 Service Manual page 99

46. Check flywheel runout at gear surface:

maximum runout 0.024 in. (0.6 mm)
47. Install valve cover and gasket. Tighten bolts to 7
lb.ft. (9 Nm).
48. Apply grease WSD-M13P8-A1 or equivalent to
spark plug threads.
49. Install spark plugs and tighten to 10-13 lb.ft. (13-
17 Nm).
TSG‐416 ENGINE
50. Install oil filter support with new filter. Tighten
bolts to 15 lb.ft. (20 Nm).
51. Install oil pressure switch and tighten to 15 lb.ft.
(20 Nm).
52. Install crankshaft position sensor and tighten to
3 lb.ft. (4 Nm).
02‐55