EDI TSG-416 Service Manual page 100

53. Install intake manifold and gasket. Tighten bolts
and nuts to 6 lb.ft. (8 Nm).
54. Install coolant flow control module and gasket.
Tighten bolts to 7 lb.ft. (10 Nm).
TSG‐416 ENGINE
55. Apply sealer WSK-M2G 349-A4 (Loctite 648) to
lower end of oil level indicator tube. Install
immediately and tighten bolt to 15 lb.ft. (20 Nm).
56. Apply sealer WSK-M2G 349-A7 (Loctite 243) to
threads of coolant return connector. Install and
tighten to 15 lb.ft. (20 Nm).
02‐56