EDI TSG-416 Service Manual page 84

18. Remove 3 bolts and the water pump pulley.
19. Remove 3 bolts, water pump and gasket.
NOTE: When removing oil pan, always keep the engine
in its normal upright position to avoid contamination.
20. Remove bolts, gasket and oil pan
21. Turn the engine over 180°.
TSG‐416 ENGINE
22. Remove 4 nuts, 1 bolt, oil pick-up tube and oil
deflector.
23. Insert retaining clip # BF9A-6606-AA between
crankshaft pulley and oil pump to prevent pulley
axial movement.
24. Remove crankshaft pulley bolt.
NOTE: Identify oil pump bolts so they may be returned
to their original positions.
25. Remove 6 oil pump bolts, and oil pump.
02‐40