EDI TSG-416 Service Manual page 95

21. Tighten guide and tensioner arm bolts to 18-21
lb.ft. (24-28 Nm).
22. Using locking tool, tighten camshaft sprocket
bolt to 59 lb.ft. (70-80 Nm).
TSG‐416 ENGINE
23. Tighten hydraulic tensioner to 27-32 lb.ft. (36-44
Nm).
CAUTION: The oil pump, pulley and sealer are
provided as an assembly kept together by a clip (no.
BF9A-6606-AA). Do not remove clip until oil pump is
installed. If pulley is pushed out of the oil pump prior
to oil pump installation.
02‐51