Advertisement
Highlights
Applications. The flexible analog line card interface is ideal for:
• Automatic call distributors
• Digital loop carriers
• Fax boards
• Fax servers
• Fiber-in-the-loop
• Hybrid-fiber/Coax
• Key systems
Module Interface Ports and Pins. The SocketSLIC interface
module uses channel associated signaling (A and B bits)
to control the analog interface. (It can be programmed to
support unique interfaces per specific customer installation
requirements.)
Reduces Development Time. The SocketSLIC interface
module actually provides faster time-to-market because
it relieves the burden and expense of designing the analog
interface. This complete, ready-to-integrate analog module
allows you to enhance your product while you focus on
developing its core features.
Who's Multi-Tech? Multi-Tech Systems is an ISO 9001:2000
certified global manufacturer of award-winning telephony,
Internet, remote access and device networking products
that connect voice and data over IP networks. Within a 34
year history inventing products known for their reliability
and performance, Multi-Tech still employs the same mission
from which the company was founded: to provide quality
solutions that solve real business problems. To reinforce
this philosophy, Multi-Tech prides itself on developing and
fostering mutually beneficial long-term relationships with its
worldwide network of technology partners, sales channels
and customers.
World Headquarters
Tel: (763) 785-3500
(800) 328-9717
www.multitech.com
1/07 28002033
Copyright © 2007 by Multi-Tech Systems, Inc. All rights reserved.
• Modems
• Multiplexers
• PBX, PC-PBX, IP-PBX
• Remote terminals
• Voice processing boards
• VOIP gateways
• Wireless local loop
EMEA Headquarters
Multi-Tech Systems (EMEA)
United Kingdom
Tel: +(44) 118-959 7774
Specifications
Ports Per Module
Analog Port: 1 (Telephony interface)
Digital Port: 1 (TDM interface)
Control Port: 1 (Serial interface)
Standard Telephony Interfaces
Foreign Exchange Subscriber (FXS): Loop-Start or
Ground-Start
Foreign Exchange Office (FXO): Loop-Start or Ground-Start
Dial Pulse Originating (DPO): Direct-Inward-Dialing
Dial Pulse Terminating (DPT): Direct-Inward-Dialing
E&M Signaling (E&M): 2-wire or 4-wire, Type I-V
Pulse Link Repeater (PLR): 2-wire or 4-wire, Type I-V
Transmission Only (TO): 2-wire
Equalized Transmission Only (ETO): 4-wire
Standard TDM Interfaces
AT&T: Concentration Highway Interface
Multi-Vendor Integration Protocol (MVIP)
Mitel: ST-Bus
Siemens: PCM Highway
Standard Serial Interfaces
SPI Interface: 3-wire synchronous
UART Interface: 2-wire asynchronous
Power Requirements
Voltage: +5VDC
Tolerance: +/-5%
Current: 0.1 A maximum
Power: 0.5 W maximum
Dimensions
3.750" L x 1.065" W x 0.540" H
(9.525cm x 2.705cm x 1.372cm)
Environmental
Operating Temp: +32° to +104° F (0° to +40° C)
Storage Temp: -40° to +185° F (+4° to +85° C)
Humidity: 5% to 95% non-condensing
Approvals
CE Mark
EMC: FCC Part 15 Class A, EN 55022, EN 55024
Safety: UL 60950, EN 60950
Telecom: FCC Part 68, CS-03, TBR21
Ordering Information
Product
Description
MTIFM
Telephony Interface Module
Made in Mounds View, MN, U.S.A.
Features and specifications are subject to change without notice.
Trademarks / Registered Trademarks: SocketSLIC, Multi-Tech, and the
Multi-Tech logo: Multi-Tech Systems, Inc. / All other products and technologies
are the trademarks or registered trademarks of their respective holders.
Multi-Tech Systems (EMEA)
France
Tel: +(33) 1 64 61 09 81
Region
US/Can/Euro
Advertisement
