Set Up Menu; Display Indication - Pioneer deh-x3550UI Owner's Manual

Operating this unit
Part Operation
Press to recall preset stations.
h Press to select the next/pre-
a/b
vious folder.
Press to select an audio func-
i
AUDIO
tion.
Press to select different dis-
plays.
j
DISP/SCRL
Press and hold to turn dimmer
on or off.
Press to pause or resume play-
k
e
back.
FUNC-
l Press to select functions.
TION
Press to display the disc title,
track title, folder, or file list de-
pending on the source.
LIST/
m
Press to display the list de-
ENTER
pending on the source.
While in the operating menu,
press to control functions.

Display indication

DEH-X3550UI
1 2
4 5 6 8 a c
3 7 9 b
DEH-2550UI
c 7 6 a
4 5 8 9 b
1 2
Indicator State
! Tuner: band and fre-
quency
! RDS: program service
name, PTY information
Main infor-
and other literal informa-
1 mation sec-
tion
tion
! CD player, USB storage
device and iPod: elapsed
playback time and text in-
formation
Appears when a lower tier of
2
folder or menu exists.
Shows when 12H is selected
under 12H/24H and CLOCK
3
is selected under INFO DIS-
PLAY.
The list function is being oper-
4
(list)
ated.
Sub infor-
5 mation sec- Sub information is displayed.
tion
6
LOC Local seek tuning is on.
TP (traffic
program
7
A TP station is tuned in.
identifica-
tion)
TA (traffic
8
announce- TA function is on.
ments)
Operating this unit
Indicator State
The sound retriever function
9 (sound re-
is on.
triever)
Random play is on.
(ran-
The iPod source is selected
a
dom/shuf-
and the shuffle or shuffle all
fle)
function is on.
b
(repeat) Track or folder repeat is on.
(iPod This unit's iPod function is op-
c
control) erated from your iPod.

Set up menu

When you turn the ignition switch to ON after in-
stallation, set up menu appears on the display.
You can set up the menu options below.
1 After installation of this unit, turn the
ignition switch to ON.
SET UP appears.
2 Turn M.C. to switch to YES.
# If you do not operate for 30 seconds, the set up
menu will not be displayed.
# If you prefer not to set up at this time, turn M.C.
to switch to NO. Press to select.
If you select NO, you cannot set up in the set up
menu.
3 Press M.C. to select.
4 Perform the following procedures to set
the menu.
To proceed to the next menu option, you need to
confirm your selection.
CLOCK SET (setting the clock)
1 Turn M.C. to adjust hour.
2 Press M.C. to select minute.
3 Turn M.C. to adjust minute.
4 Press M.C. to confirm the selection.
FM STEP (FM tuning step)
Normally, the FM tuning step employed by seek
tuning is 50 kHz. When AF or TA is on, the tuning
step automatically changes to 100 kHz. It may be
preferable to set the tuning step to 50 kHz when
AF is on.
! The tuning step remains at 50 kHz during man-
ual tuning.
1 Turn M.C. to select the FM tuning step.
50 (50 kHz)—100 (100 kHz)
2 Press M.C. to confirm the selection.
MW STEP (MW tuning step)
The MW tuning step can be switched between
9 kHz and 10 kHz. When using the tuner in North,
Central or South America, reset the tuning step
from 9 kHz (531 kHz to 1 602 kHz allowable) to
10 kHz (530 kHz to 1 640 kHz allowable).
1 Turn M.C. to select the MW tuning step.
9 (9 kHz)—10 (10 kHz)
2 Press M.C. to confirm the selection.
QUIT appears.
5 To finish your settings, turn M.C. to select
YES.
# If you prefer to change your setting again, turn
M.C. to switch to NO. Press to select.
6 Press M.C. to select.
Notes
! You can set up the menu options from the
system menu. For details about the settings,
refer to System menu on page 9.
! You can cancel set up menu by pressing
SRC/OFF.
Section
02
3
En