Set Up Menu; Basic Operations - Pioneer DEH-X8580BT Owner's Manual

Section
Using this unit
02
Part Operation
Press to select different dis-
j DISP/SCRL
plays.
Press to pause or resume play-
k
e
back.
Press to start talking to the
l
caller while using the phone.
Press to display the list de-
LIST/
pending on the source.
m
ENTER
While in the operating menu,
press to control functions.

Set up menu

When you turn the ignition switch to ON after in-
stallation, set up menu appears on the display.
You can set up the menu options below.
1 After installation of this unit, turn the
ignition switch to ON.
Set up appears.
2 Turn M.C. to switch to YES.
# If you do not use the unit for 30 seconds, the set
up menu will not be displayed.
# If you prefer not to set up at this time, turn M.C.
to switch to NO.
If you select NO, you cannot set up in the set up
menu.
3 Press M.C. to select.
4 Follow these steps to set the menu.
To proceed to the next menu option, you need to
confirm your selection.
6
En
Language select (multi-language)
1 Turn M.C. to select the desired language.
English Español Português
2 Press M.C. to confirm the selection.
Calendar (setting the date)
1 Turn M.C. to change the year.
2 Press M.C. to select day.
3 Turn M.C. to change the day.
4 Press M.C. to select month.
5 Turn M.C. to change the month.
6 Press M.C. to confirm the selection.
Clock (setting the clock)
1 Turn M.C. to adjust hour.
2 Press M.C. to select minute.
3 Turn M.C. to adjust minute.
4 Press M.C. to confirm the selection.
FM step (FM tuning step)
1 Turn M.C. to select the FM tuning step.
50kHz (50 kHz) 100kHz (100 kHz)
2 Press M.C. to confirm the selection.
AM step (AM tuning step)
1 Turn M.C. to select the AM tuning step.
9kHz (9 kHz) 10kHz (10 kHz)
2 Press M.C. to confirm the selection.
Contrast (display contrast setting)
1 Turn M.C. to adjust the contrast level.
0 to 15 is displayed as the level is increased or
decreased.
2 Press M.C. to confirm the selection.
Quit appears.
5 To finish your settings, turn M.C. to select
YES.
# If you prefer to change your setting again, turn
M.C. to switch to NO.
Using this unit
6 Press M.C. to select.
Notes
! You can set up the menu options from the
system menu. For details about the settings,
refer to System menu on page 18.
! You can cancel set up menu by pressing
SRC/OFF.

Basic operations

Important
! Handle the front panel with care when re-
moving or attaching it.
! Avoid subjecting the front panel to excessive
shock.
! Keep the front panel out of direct sunlight
and high temperatures.
! To avoid damaging the device or vehicle inte-
rior, remove any cables and devices attached
to the front panel before detaching it.
Removing the front panel to protect your unit from
theft
1 Press the detach button to release the front
panel.
2 Push the front panel upward (M) and then pull
it toward (N) you.
3 Always store the detached front panel in a pro-
tective case or bag.
Re-attaching the front panel
1 Slide the front panel to the left.
Make sure to insert the tabs on the left side of
the head unit into the slots on the front panel.
2 Press the right side of the front panel until it is
firmly seated.
If you cannot attach the front panel to the
head unit successfully, make sure that you are
placing the front panel onto the head unit cor-
rectly. Forcing the front panel into place may
result in damage to the front panel or head
unit.
Turning the unit on
1 Press SRC/OFF to turn the unit on.
Turning the unit off
1 Press and hold SRC/OFF until the unit turns
off.