Table of Contents
Advertisement
Figure 2. Removing a PC Card
To protect the PC Card connectors, install a blank if you are not going to use the connector.
Configuring PC Cards
The PC Card configuration utility performs the following functions:
Notifies you whenever a PC Card is inserted and tells you how the card is configured
Automatically loads the proper device driver if it is available on the hard-disk drive
If drivers are not available on the hard-disk drive, prompts you to install them using the device driver
diskette that came with the card
The operating system automatically detects a PC Card and opens the Add New Hardware menu from the
Control Panel. For more information, see the PC Card operating system documentation.
Back to Contents Page
Advertisement
Table of Contents
