Signing Off The Cooktop - Miele KM 6304 Operating And Installation Instructions

Signing off the cooktop

If you want to sign your cooktop off from Miele{home, you
will need to prepare the sign off process on the master unit
first (see Installation instructions "Miele|home").
^ While the cooktop is switched off, touch the s and $
sensors at the same time until the indicator light for the
safety lock flashes.
After starting the programming function, P (programme) and
an S (status) will appear in the timer display. With cooktops
that have 3 cooking zones, an additional display appears at
the back left.
^ Touch the sensor selecting the front left cooking zone and
then touch the 1 on the numerical keypad (Set Programme
10).
^ Touch the sensor for selecting the front right cooking zone
and then touch the 1 on the numerical keypad (Set Status 1
= Signed off).
The signing-off process starts, and the number 1 flashes. The
signing off process will take a few minutes. The number 1 will
light up constantly when the process has been completed
successfully.
^ To save the setting, touch the s sensor until the displays
go out.
^ Proceed as described in the Installation instructions for
"Miele|home" and "Con|ctivity".
Con|ctivity and Miele|home
57