Miele KM 6304 Operating And Installation Instructions page 49

Problem
A smell and vapours
are given off when a
new appliance is
being used.
The ß symbol flashes
alternately with the
power setting
selected in one of the
cooking zones.
After the cooktop is
switched on "LC"
appears in the timer
display for a few
seconds.
After the cooktop is
switched on "dE"
appears in the timer
display for a few
seconds.
The cooking zones do
not heat up.
A cooking zone or the
whole cooktop
switches off
automatically.
The Booster has
deactivated early
automatically.
The cooking zone is
not working in the
usual way at the
power level set.
Possible cause
There is no pan on the
cooking zone, or the pan is
unsuitable.
The system lock is
activated.
The appliance is in
demonstration mode.
A cooking zone has been
in use for too long.
The overheating protection
mechanism has triggered.
The overheating protection
mechanism has triggered.
Problem solving guide
Remedy
The smell and vapours will
be less noticeable with
each subsequent use
before dissipating
completely.
Use a suitable pan (see
"Pans").
Deactivate the system lock
(see "Safety lock / System
lock").
Deactivate demonstration
mode (see
"Programming").
You can use the cooking
zone again by switching it
back on (see "Safety
switch-off").
See "Overheating
protection".
See "Overheating
protection".
49