Bottom Feed Dog Height - Pfaff 1051 Instruction Manual

11.

Bottom feed dog height

05.06
11 - 8
Requirement
When feed dog 1 is at its highest point at stitch length setting "0" it must
1. be centred in the feed slot crosswise and in feeding direction
2. Rest on feed dog adjustment gauge 2 over its entire length.
7
3
Fig. 11 - 07
Set stitch length at "0" and feed dog 1 at its highest position
Raise the presser foot.
Place feed dog adjustment gauge 2 on the needle plate cutout with the arrow in sewing
direction so that it is flush with the front edge, and lower the presser foot onto it.
Adjust feed bar 3 (screws 4) according to Requirement 1.
Loosen screws 5 and 6.
Adjust feed bar 3 or eccentric 7 according to Requirement 2.
Tighten screws 5 and 6 firmly.
6
5
Adjustment
4
1
2