Adjustment
13
Height of the bottom feed dog
.04.03
●
●
8
Requirement
When the stitch length is set at "0", in its highest position the bottom feed dog 4 should
be 0.8 - 1.1 mm above the top edge of the needle plate.
5
4
Fig. 13 - 03
Set the stitch length at "0".
Adjust eccentric 1 and 2 (screws 3) in accordance with the requirement.
The bottom feed dog 4 should not touch cloth plate 5.
(only on machines with lifting phase – P-version)
2
1
4
3
3