Using The Radio - Hyundai TRC 756 DR3 User Manual

RADIO /CD/MP3 OPERATION

USING THE RADIO

1. Press FUNCTION button. Select TUNER mode.
2. Press BAND to select the desired wave band: AM, FM
3. Tune to required station by rotate the TUNING on the unit clockwise to SKIP+ or anticlockwi-
se to skip
Manual Tuning: Rotate SKIP- or SKIP+ and then release within 1 sec.
Auto Tuning: Hold SKIP- or SKIP+ over 1sec .And then release it at any time. After key relea-
se, the auto-tuning operation will start until find a station.
Preset Channel :(Program up to 10 favor i te frequency each bands)
(1) Rotate SKIP+ or SKIP- Select desired station.
(2) Press MEMORY button once , The MEMORY number indicator begins steady in the dis-
play.
(3) Press PRE-UP OR PRE - DN buttons to select the desired number
(4) Press MEMORY button to save that station.
(5) Repeat steps (1) to (4) procedures for other stations.
4. After end of program. press PRE-UP or PRE-DN to start play the frequency that you selected
or Press number key on the remote control
5. Rotate the VOLUME Knob on the unit clockwise to increase or anticlockwise to decrease.
6. Extend TELESCOPIC ANTENNA to its full length if you are listening to FM broadcasting.
Gently rock the unit back and forth to get the best reception when you are listening to AM pro-
grammable, or place the unit in an open location.
7. Turn off the radio by press FUNCTION button select other mode.
MONO/STEREO
Press MO/ST button once on the remote control, MONO is displayed.
Press MO/ST button twice on the remote control, STEREO is displayed.
PLAYING CD/MP3
1. Press FUNCTION button select CD mode
2. Open the disc compartment lid.
3. Place a CD/MP3 disc into the tray with the label side facing up.
4. Close the disc compartment door( auto play) or When other mode, Press PLAY button
5. To interrupt playback, press PLAY/PAUSE button. The track number will be flashed every
0.5s.
Pause function will be kept after SKIP- or SKIP+.
To resume playback, press PLAY/PAUSE button again to continue.
6. CD PLAY, LCD display shows ESP word , ESP function begin working,
ESP time is two minutes. LCD display ESP word disappear after once more press the ESP
key.
it means ESP function disappear.
7. To stop playback, press STOP button to stop play and then total time and total number will
show on the display.
ENG - 42