Mounting On The Table - Panasonic KX-HCM280 Getting Started

Mounting
Two ways of mounting are shown in the following figures. MAC Address and Serial
Number are indicated on the bottom label of the main unit of the Network Camera.
Record both of them on the Network Camera Memo on page 3 in the Operating
Instructions. They are indispensable for setting network parameters after
mounting a Network Camera and for future customer servicing.
Notes
• Mounting and cabling instructions described in this Getting Started follow
generally accepted guidelines suitable for residential installations. In some
areas, commercial and industrial installations are regulated by local or
state ordinances. For such installations, contact your local building
department or building inspector for more details.
• The Network Camera is intended for indoor use only. Prolonged exposure
to direct sunlight or halogen light may damage CCD.

Mounting on the Table

Mount the Network Camera at an even place without vibrations.
Note
The Network Camera is available between
on the ceiling.
15° based on level line for mounting
Operating Instructions
13