Other Functions; Using The Aux Source - Pioneer DEH-4200SD Operation Manual

Operating this unit
Initially, Rear SP is set for rear full-range speaker connection (Full). When Rear SP
:Full is selected, you can connect the RCA output to a subwoofer. In this case, you
can select whether to use the subwoofer controller's (low pass filter, phase) built-in
Preout :SUBW or the auxiliary Preout :Rear.
1. Press M.C. to display the setting mode.
2. Press M.C. to cycle between as following:
Rear SP/Preout – Full (SUBW)/SUBW(Rear)
3. Turn M.C. to change the setting.
Rear SP: Full – SUBW
Preout: SUBW – Rear
• Even if you change this setting, there is no output unless you turn the subwoofer
output on (refer to "SW setting 1 (subwoofer on/off setting)" on page 17).
• If you change this setting, subwoofer output in the audio menu will return to the
factory settings.
4. Press M.C. to confirm the selection.
DEMO (demo display setting)
* Press M.C. tp turn the demo display on or off.
Ever SCRL (scroll mode setting)
When Ever Scroll is set to ON, recorded text information scrolls continuously in the
display. Set to OFF if you prefer the information to scroll just once.
* Press M.C. to turn the ever scroll on or off.
Title (multi language)
This unit can display them even if they are embedded in a European language or
Russian.
Text information such as title name, artist name or comment can be recorded on a
compressed audio disc.
• If the embedded language and the selected language setting are not the same, text
information may not be displayed properly.
• Some characters may not be displayed properly.
1. Press M.C. to display the setting mode.
2. Turn M.C. to select the desired setting.
3. Press M.C. to confirm the selection.
PowerSave (power save)
* Press M.C. to turn the power save on or off.

Other Functions

Using the AUX source

1. Insert the stereo mini plug into the AUX input jack.
2. Press SRC/OFF to select AUX as the source.
Autogood products internet store http://130.com.ua
EURO (European) – RUSSIA (Russian)
Switching this function on enables you to reduce the consumption of battery power.
Turning on the source is the only operation allowed when this function is on.
Note
• If PowerSave is on, DEMO cannot be selected.
Note
• AUX cannot be selected unless the auxiliary setting is turned on. For more details, refer to
"AUX (auxiliary input)" on page 18.
19