Connections - Pioneer DEH-4200SD Operation Manual

Cd rds receiver
Hide thumbs Also See for DEH-4200SD:
Table of Contents

Advertisement

Connections

Notes
• Change the initial setting of this unit (refer to the
operation manual). The subwoofer output of this unit
is monaural (DEH-3200UD).
• When using a subwoofer of 70 W (2 $), be sure to
connect with Violet and Violet/black leads of this unit.
Do not connect anything with Green and Green/black
leads.
Note
Depending on the kind of vehicle,
the function of 2* and 4* may be
different. In this case, be sure to
Speaker leads
connect 1* to 4* and 3* to 2*.
White: Front left +
White/black: Front left -
Gray: Front right +
Gray/black: Front right -
Green: Rear left + or subwoofer +
Green/black: Rear left - or subwoofer -
Violet: Rear right + or subwoofer +
Violet/black: Rear right - or subwoofer -
Connect leads of the
same color to each other.
Yellow (2*)
Yellow (1*)
Back-up (or
Connect to the constant 12 V supply terminal.
accessory)
Red (4*)
Red (3*)
Accessory (or
Connect to terminal controlled by ignition
back-up)
switch (12 V DC).
Black (chassis ground)
Connect to a clean, paint-free metal location.
ISO connector
Note
In some vehicles, the ISO connector may
be divided into two. In this case, be sure to
connect to both connectors.
Rear output or
subwoofer output
(DEH-3200UB)
This product
Antenna
jack
Fuse (10 A)
Wired remote input
Hard-wired remote control
adaptor can be connected
(sold separately).
Blue/white
Connect to system control terminal
of the power amp (max. 300 mA
12 V DC).
Blue/white (5*)
Yellow/black
If you use an equipment with Mute
function, wire this lead to the Audio
Mute lead on that equipment. If not,
keep the Audio Mute lead free of any
connections.
Autogood products internet store http://130.com.ua
For DEH-4200SD
To subwoofer output
Rear output
(DEH-4200SD)
To rear output
Front output
(DEH-4200SD)
To front output
Subwoofer output
(DEH-4200SD)
Connect with RCA cables (sold separately)
System remote control
Blue/white (6*)
Connect to auto-antenna relay
control terminal (max. 300 mA
12 V DC).
Subwoofer
The pin position of the ISO
For DEH-3200UB
connector will differ depending
on the type of vehicle. Connect
5* and 6* when Pin 5 is an
antenna control type. In
another type of vehicle, never
To rear output or
connect 5* and 6*.
subwoofer output
System remote control
Rear speaker or
subwoofer
Power amp (sold
separately)
Power amp (sold
separately)
Front
Front
speaker
speaker
Rear
Rear
Rear
speaker
speaker
speaker
Subwoofer
Perform these connections when
using the optional amplifier.
Power amp (sold
separately)
Connect with RCA
cable (sold separately)
Rear speaker or
subwoofer
4
Power amp (sold
Power amp (sold
separately)
separately)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Deh-3200ub

Table of Contents