Adjustment Standard (Charger Unit); Adjustments (Handset) - Panasonic KX-TCD410AXM Service Manual

www.freeservicemanuals.info
When connecting the Simulator Equipments for checking, please refer to below.
14.2.1. Component View
Note:
(H) - (O) is refered to
14.2.2. Flow Solder Side View
Note:
(A) - (P) is refered to
14.3. Adjustment (Charger Unit)
Items
(A Charging Check
)
Note:
After the measuring, sock up the solder of TP.
The connection of adjustment equipment are as shown in

14.4. Adjustment Standard (Charger Unit)

When connecting the Simulator Equipments for checking, please refer to below.
14.4.1. Flow Solder Side View
Note:
(A) is refered to

15. ADJUSTMENTS (HANDSET)

If your unit have below symptoms, adjust or confirm each item using remedy column from the table.
ADJUSTMENTS (BASE UNIT AND CHARGER UNIT)
ADJUSTMENTS (BASE UNIT AND CHARGER UNIT)
Adjustment
Point
-
1. Connect Charge Contact 12
2. Measure and confirm voltage across the regigster is 2.7V ± 0.2V.
ADJUSTMENTS (BASE UNIT AND CHARGER UNIT)
Digitized in Heiloo, Holland
()
()
Procedure
/2W register between charge+ and charge-.
Adjustment Standard (Charger Unit)
()
44
11/8/2014
Check
Replac
Parts
D1, R1,
().