For Service Technicians; Battery Installation - Panasonic KX-TCD410AXM Service Manual

www.freeservicemanuals.info
Note:
The location of the "PbF" marks is subject to change without notice.
1.2.2. Handset PCB
Note:
The location of the "PbF" marks is subject to change without notice.
1.2.3. Charger Unit PCB
Note:
The location of the "PbF" marks is subject to change without notice.

2. FOR SERVICE TECHNICIANS

ICs and LSIs are vulnerable to static electricity.
When repairing, the following precautions will help prevent recurring malfunctions.
1. Cover the plastic parts boxes with aluminum foil.
2. Ground the soldering irons.
3. Use a conductive mat on the worktable.
4. Do not touch IC or LSI pins with bare fingers.
3. CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type
recommendenced by the manufacturer.
Dispose of used batteries according to the manufacture's Instructions.
4. BATTERY

4.1. Battery Installation

Please ensure the batteries are inserted as shown.
Close the cover as indicated by the arrow.
- When you replace the batteries,
(Flow Solder Side View)
(Component View)
(Flow Solder Side View)
part should be inserted first.
part should be removed first.
4
Digitized in Heiloo, Holland
11/8/2014