Panasonic KX-TCD410AXM Service Manual page 36

www.freeservicemanuals.info
13.2. PC Setting
13.2.1. Connections
13.2.2. PC Setting
1. Open a window of MS-DOS mode from the start-up menu.
2. Change a directory to the one with "RTX_COM" contained.
3. Type "SET RTX_COM=1" from the keyboard (when COM port 1 is used
for the connection).
4. Type "doskey".
Note:
See the table below for frequently used commands.
Command name
rdeeprom
readid
writeid
setfreq
Getchk
Wreeprom
14. ADJUSTMENTS (BASE UNIT AND CHARGER UNIT)
If your unit have below symptoms, adjust or confirm each item using remedy column from the table.
Function
Read the data of EEPROM
Read ID (RFPI)
Write ID (RFPI)
adjust Frequency of RFIC
Read checksum
write eeprom
Digitized in Heiloo, Holland
Example
Type "rdeeprom 00 00 FF", and the data
from address "00 00" to "FF" is read out.
Type "readid", and the registered ID is
read out.
Type "writeid 00 18 E0 0E 98", and the
ID "0018 E0 0E 98" is written.
Type "setfreq nn nn".
Type "getchk".
Type "wreeprom 01 23 45". "01 23" is
address and "45" is data to be written.
36
11/8/2014