Whirlpool AWSE7000 Programme Chart

RoHS Conformity.
Note：
= CONTROL CHARACTERISTIC
THIS DRAWING IS THE PROPERTY OF WHIRLPOOL CORP. IT CONTAINS CONFIDENTIAL
INFORMATION BELONGING TO AND/OR ENTRUSTED TO WHIRLPOOL. IT IS DISCLOSED IN
CONFIDENCE AND SHALL NOT BE HELD, REPRODUCED, DISCLOSED OR USED EXCEPT IN A
MANNER AND FOR A PURPOSE EXPRESSLY PERMITTED BY WHIRLPOOL IN WRITING.
VENDORS SHALL NOT REVISE ANY PHYSICAL, DIMENSIONAL, OR PERFORMANCE
CHARACTERISTICS UNLESS AUTHORIZED IN WRITING BY WHIRLPOOL ENGINEERING GROUP.
WHIRLPOOL TEST SPECIFICATIONS, IF ANY, ARE NOT INTENDED TO ASSUME ANY
RESPONSIBILITY FOR SUBSEQUENT PROBLEMS WITH OR CAUSED BY THE PART, COMPONENT,
OR ASSEMBLY PROVIDED BY THE SUPPLIER, AND DO NOT RELIEVE THE SUPPLIER OF ITS
OBLIGATIONS INCLUDING, BUT NOT LIMITED TO, THE NEED TO PERFORM ITS OWN TESTING,
INSPECTION AND ONGOING QUALITY CONTROL, AND ASSURING FITNESS FOR USE. ANY
WHIRLPOOL RECOMMENDED TEST AND ITS OUTCOME DO NOT IN ANYWAY LIMIT OR CHANGE
THE WARRANTY CONTAINED IN WHIRLPOOL'S PURCHASE ORDER OR SUPPLY AGREEMENT.
BY ELIN CHEN
DESCRIPTION
QUICK GUIDE, AWSE 7000
DRAWING NUMBER
W10416288
26-Sep-2011 02:24:33 EDT | RELEASED
REV
A
DATE 2011-9-14
SHEET
1 OF 1
Whirlpool Corporation
Benton Harbor, MI
USA
In some European factories the letter "W" of the part code mentioned herein will be automatically
DESCRIPTION OF CHANGE
DRAWING RELEASE
replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")
DWG NO. DWG
W10416288
BY E.N.
ELIN 663429
REV
A
DATE.
2011-9-14