Hardware Installation; Ceiling Mounting - Netis WF2222 Quick Installation Manual

netis Wireless N Ceiling-Mounted Access Point Quick Installation Guide
Step 5: Now you can connect your wireless devices to the modified wireless network or
new AP networks for Internet Access wirelessly.
Remark:
The netis Access Point also supports Repeater, Client, WDS modes to bridge or repeat
signal from the existing wireless network, providing various wireless solutions.
You can click on the "Extender" tab
you need and configure it.
(For the detail configuration, please refer to "Support" -> "FAQ" on our official
website-http://www.netis-systems.com )

5. Hardware Installation

The netis Access Point can be ceiling mounted or wall mounted according to your
setup, we particularly recommend the ceiling mounted.
A. Ceiling Mounting
！
Note:
* Make sure the thickness of the ceiling must be over 17mm and the beaver gravity of
ceiling must be over five kilograms.
* If your ceiling do not meet the requirement as above, please add a plate which with
better strength on back of the ceiling.
in quick setup page. Select the mode which
9