Troubleshooting - Netis WF2222 Quick Installation Manual

Tip 1:
Default Login Address: http://netisap.cc
Default Wireless SSID: netis_XXXXXX
Default Wireless Password: password
(XXXXXX: Last 6 digits of MAC Address, you may find it from the bottom label of the device.)
Tip 2:
You can click on "Advanced" button

Troubleshooting

Q
How do I restore my netis Access Point's configuration to its default settings?
A
With the Access Point powered on, use a pin to press and hold the Default button for 8 to
10 seconds before releasing it. The Access Point will reboot and all configurations are
back to factory default.
Q
What can I do if I cannot access my Access Point's web management page?
A
1) Check the hardware connection according to your Hardware Connection and make sure
that your computer is connected to netis Access Point successfully.
2) If your Access Point is already connected to the main router, please check your computer
is set to obtain IP address automatically.
3) If you Access Point isn't connected to the main router, please try to set a static IP
(such as 192.168.1.110) for the wired/wireless adapter of your computer. Please refer to
"Appendix B: Set Static IP for Computer".
4) If there's no change, please reset the device by Default button and try all the settings
from the begging.
netis Wireless N Ceiling-Mounted Access Point Quick Installation Guide
on the left for the further settings
14