Via Poe Power Injector - Netis WF2222 Quick Installation Manual

B. Via PoE Power Injector
Typical Application and hardware connection as follows:
Internet
1) Connect your main router to the LAN/WAN port on the PoE Power Injector with an
Ethernet Cable.
2) Connect the LAN2 port of netis Access Point to the PoE port on the PoE Power Injector
with an Ethernet Cable.
3) Plug the Provided Power Adapter into the DC-IN jack on the PoE Power Injector and
the other end to a stand electrical wall socket.
4) Then go to "4. Network Configuration", to configure WF2222.
Power Adapter
Main Router
netis Wireless N Ceiling-Mounted Access Point Quick Installation Guide
PoE Power Injector
4