Control Panel; (Sj-X54Tp,Sj-X58Tp) - Sharp SJ-X54GP Operation Manual

Control panel

Operations of useful modes
Extra cool Press the mode button.
(Beep)
Express Press the mode button.
(Beep)
freezing
Express cool Press the mode button for
3 seconds or more.
(Beep, Beep, Beep)
Door Alarm
• When the refrigerator door is left open for over 1 minute, door alarm sounds once, and again after 1 minute.
• If the door is left open for approx. 3 minutes, the alarm sounds continuously.
• The alarm stops after close the door.
If Door alarm does not stop
If the door alarm does not stop after closing all doors, it is a defect.
Contact the SHARP service center for service.
Method of stopping the door alarm temporarily
• Press "R" button and "F" button simultaneously and continuously for 3 seconds or more.
• The door alarm sounds again after approximately 2 days.
22
(SJ-X54TP, SJ-X58TP)
Useful modes
Button Meaning
Extra cool
Express freezing
Express cool
Plasmacluster
Controlling temperature
Button Meaning
Controlling
temperature
of Refrigerator
compartment
Controlling
temperature of
Freezer compartment
(Except for "Plasmacluster")
Start operation
Lighting
Lighting
Flashing
Default setting
OFF
* The Plasmacluster operates
automatically when the refrigerator
is powered on.
There is no need to switch on/off.
ON *
Default setting
Note
• If you want to light up the
indicator, press "F" or "R" button.
Cancel operation
Press the mode button.
(Beep)
Press the mode button.
(Beep)
Press the mode button.
(Beep)
Turn off
Turn off
Turn off
Beep beep beep