Control Panel; (Sj-X54Gp,Sj-X58Gp) - Sharp SJ-X54GP Operation Manual

Control panel

Select
button
Switching
button
Enter button
Operations of useful modes
Select the mode icon.
1
Select on/off.
2
Complete the setting.
(Beep)
3
"Express cool"only
Complete the setting by pressing
for 3 seconds or more.
(Beep, Beep, Beep)
Operation of additional modes
Door alarm • When the refrigerator door is left open for over 1 minute,
door alarm sounds once, and again after 1 minute.
• If the door is left open for approx. 3 minutes, the alarm
sounds continuously.
• The alarm stops after close the door.
• When you want to switch off button operation sound.
Sound
of button
operation
Note • When you want to turn on the additional mode, follow the same step again. (The indicator turns on.)
20

(SJ-X54GP,SJ-X58GP)

Controlling temperature
Icon Meaning
Freezer compartment
Refrigerator
compartment
Useful modes
Icon Meaning
Extra cool
Express freezing
Express cool
Plasmacluster
Energy saving
Additional modes
Indicator Meaning
Door alarm
Sound of button
operation
Display
(e.g. Extra cool)
Flashing
Mode icon turns Mode icon turns
on. off on the standby
display.
"Express cool"
only
(Flashing)
Summary
Note
• When you press one of the
Default setting
buttons, all icons ash once and
-18°C
show the standby display. If the
refrigerator stops because of
3°C
power failure, the modes except
for Extra cool and Express
freezing function the same way as
before at the time of re-power.
Default setting
• Operation is invalid while the
freezer door is open.
• Mode icons or indicators
in operation light up on
the standby display.
OFF
When Express cool is
in operation, the icon
ashes on the standby
display.
• When there is
Default setting
no operation for
approximately
1 minute, the
display returns to
ON
the standby display automatically.
The standby display turns off if
there is no operation for another
1 minute.
When press
change in the order shown as below.
Standby display
(off)
:
Useful modes
Cancel operation
Press and simultaneously
for 3 seconds or more.
(Beep, Beep, Beep)
Press and simultaneously
for 3 seconds or more.
(Beep, Beep, Beep)
Turn-on state
button, the icons
Display
The indicator
turns off.
The indicator
turns off.