Advertisement
28. Turn over the floor carpet, and attach the bus
cable to the floor panel with the three cushion
tapes in the areas shown.
29. Secure the bus cable to the vehicle harness with
the five wire ties in the areas shown.
Turn over.
8 of 11
CUSHION
TAPE
WIRE TIES
BUS CABLE
VEHICLE
HARNESS
CUSHION
TAPES
Installing the CD Changer
30. Carefully unpack the CD changer.
POSITION)
VERTICAL
KNOB
31. The adjustment knobs have been set to the
vertical (V) position before shipping the CD
changer from the factory. Move the adjustment
knobs to the horizontal (H) position using a small
flat-tip screwdriver.
32. Position the CD changer brackets on the sides of
the CD changer, then install the four 4 x 8 mm
washer-screws.
2 WASHER-SCREWS
4 x 8 mm
AII 42446 (0908)
AFTER SETTING)
CHANGER
CD
CHANGER
SIDE BRACKETS
2 WASHER-SCREWS
4 x 8 mm
© 2009 American Honda Motor Co., Inc. - All Rights Reserved.
HORIZONTAL
Advertisement
