Advertisement
40. Plug the bus cable connector, vehicle 20-pin
connector (blue), and antenna lead into the rear of
the audio unit.
STANDARD AUDIO UNIT
ANTENNA
LEAD
MULTI CONTROL CD TUNER UNIT
POCKET
ANTENNA
LEAD
NAVIGATION HEAD UNIT
ANTENNA
LEAD
© 2009 American Honda Motor Co., Inc. - All Rights Reserved.
VEHICLE 20-PIN
CONNECTOR
BUS CABLE
CD PLAYER
BUS CABLE
VEHICLE 20-PIN
CONNECTOR
VEHICLE 20-PIN
CONNECTOR
BUS CABLE
AII 42446 (0908)
41. Connect the four vehicle connectors to the
center panel, and reinstall the center panel.
4 VEHICLE CONNECTORS
CENTER PANEL
VEHICLE 20-PIN
CONNECTOR
BOLTS
(reused)
42. Check that all wire harnesses are routed
properly and that all connectors are plugged in.
43. Reconnect the negative cable to the battery.
44. Reset the clock and the radio station presets.
45. Check the operation of the CD changer as
described in the accessory user's information
manual.
46. Reinstall all removed parts. Be sure that all
retaining clips and tabs are secrely fastened.
47. Put the accessory user's information manual in
the glove box for your customer.
48. Initialize and test the front window auto up/down
function.
BUS CORD
CONNECTOR
ANTENNA
LEAD
11 of 11
Advertisement
