Setting Keypad Tone; Setting Opening & Closing Tones - SoftBank 304T User Manual

Setting Keypad Tone

Set a tone to confirm when a key is pressed. The default settings are Original for the tone and
Level 1 for the volume level.
ex. Setting Keypad Tone to Fixed Melody
1
Press C13
2
Use G to select Keypad Tone and press @
E
Select Tone is highlighted.
To set the volume level, use G to select Volume, then proceed to Step 4 on page 8-7.
3
Press @
4
Use G to select Melodies and press @
To play a melody, press L
Pla
melody, press L
Stop .
5
Use G to select a melody and press @
8
E
Keypad Tone is set.
If Manner Mode (@ page 3-4) is set, Manner Mode volume settings take priority
●
Tip
over this setting.
When Speaker Off (@ page 3-2) is set, the keypad tone is not heard.
●
If Keypad Tone is set to a tone from Melodies, a tone plays for one second when a
Note
key is pressed.
8-8
, select One Time or Repeat and press @. To stop the
y
Setting Opening & Closing Tones
Set tones for when the handset is opened or closed. The default settings are Original for the
tones and Off for the volume levels.
ex.
Setting Opening Tone to Fixed Melody
1
Press C13
2
Use G to select Opening Tone and press @
E
Select Tone is highlighted.
To set the volume level, use G to select Volume, then proceed to Step 4 on page 8-7.
●
If Closing Tone is selected, the following setting procedure also applies.
●
3
Press @
4
Use G to select Melodies and press @
To play a melody, press L , select One Time or Repeat and press @. To stop
● Pla y
the melody, press L
Stop .
To set a melody saved to the Data Folder, select Data Folder.
●
5
Use G to select a melody and press @
E
Opening Tone is set.
If Manner Mode (@ page 3-4) is set, Manner Mode volume settings take priority
●
Tip
over this setting.
When Speaker Off (@ page 3-2) is set, the opening tone and closing tone are not
●
heard.
If Opening Tone/Closing Tone is set to a tone from Melodies or Data Folder, a tone
Note
plays for two seconds when the handset is opened/closed.
8
8-9