Checking The Number Of Scanned Original Sheets Before Transmission (Original Count) - Sharp MX-M503N Operation Manual

CHECKING THE NUMBER OF SCANNED
ORIGINAL SHEETS BEFORE TRANSMISSION
(Original Count)
The number of scanned original sheets can be counted and displayed before transmission. Checking the number of
scanned original sheets before transmission helps prevent transmission mistakes.
Indicator
line
1
Enter the destination fax number.
2
☞
ENTERING DESTINATIONS
(2)
Fax/Special Modes
Program
3
Timer
Job
Build
Original
Count
Press the [START] key.
Scanning begins.
4
To cancel scanning...
Press the [STOP] key (
(page 4-17)
(3)
OK
Dual Page
Erase
Scan
1
2in1 Card Shot 2
Mixed Size Slow Scan
Mode
Original
File Quick File
) to cancel the operation. All scanned data will be cleared.
Insert the originals face up in the
document feeder tray.
Insert the originals all the way into the document feeder tray.
Multiple originals can be placed in the document feeder tray.
The stack of originals must not be higher than the indicator line
on the tray.
Select the original count function.
(1) Touch the [Special Modes] key.
☞
SPECIAL MODES
(2) Touch the [Original Count] key so that it is
highlighted.
(3) Touch the [OK] key.
4-92
FACSIMILE
(page 4-70)
Contents