Sharp MX-M503N Operation Manual page 191

Tab copying with a right binding
Originals
Originals
1
Final image
Place the original.
1
Place the original face up in the document feeder tray, or face down on the document glass.
Select the special modes.
(1) Touch the [Special Modes] key.
2
(2) Touch the [Tab Copy] key.
☞
Special modes menu (1st screen)
Special Modes
Tab Copy
3
Original
Placing the originals
• Document feeder tray
Insert the originals so that the side with no
tab text enters first.
• Document glass
1
Place so that the side with the tab text is
on the left.
(page 2-41)
(1) (2)
OK
Cancel OK
Copy
Image Shift
10
(0~20)
mm
Load the tab paper so that the tab on the
first sheet is away from you.
Set the tab width.
(1) Set the image shift width (tab width) with
the keys.
0 mm to 20 mm (0" to 5/8") can be entered.
You can also directly touch a numeric value display key to
change a number with the numeric keys.
(2) Touch the [OK] key.
You will return to the base screen of copy mode.
2-79
COPIER
Loading tab paper
Reverse
side
Contents