Advertisement
OPERATION
4. Low-Angle Setup (continued)
1. With the column lowered,
remove the built-in weight hook
from the bottom of the column
by turning it counterclockwise
and pulling it out of the column.
2. Turn the center column locking
knob counterclockwise to
unlock the center column.
Remove the center column from
the tripod.
3. Reverse the center column, line
up its groove with the interior
nodule, and insert it up through
the bottom of the tripod top
plate.
4. Slide the center column into
the desired position. Turn the
center column locking knob
clockwise to lock it at the
desired height.
SPLIT THE CENTER COLUMN
Splitting the center column
shortens the column length and
allows for setting the tripod
legs at their widest angle. This
facilitates low-angle shots from
the top of the tripod. To split the
center column, follow these steps:
1. Remove the weight hook from
the bottom of the column by
turning it counterclockwise and
pulling it out of the column.
8
Advertisement
