Wall Mounting; Volume Control; Mute Button - Doro AUB 300i Manual

English

Wall mounting

The telephone can be wall mounted using an optional wall mount bracket.
The wall mount bracket is available as an accessory, part number WB200/300 in white
or black.
1. Fix the wall mount bracket on the back of the telephone.
2. Secure two screws, vertically positioned 83 mm apart.
3. The screws should locate into the two keyholes on the wall mount bracket.
4. Activate the hanging peg (located by the hook switch) by lifting it upwards and
rotating it 180 degrees.
Making a call
Lift the handset and dial the required telephone number.
Pre-Dialling
You can enter and correct a telephone number before dialling.
1. Dial the required telephone number. Mistakes can be erased using .
C
2. Press DIAL OR press to dial the number.
s
Redial
Repeatedly press REDIAL to view the last 5 numbers dialled. Press DIAL OR press
to dial the number.
s

Volume control

The Handset/headset earpiece volume may be increased or decreased during a call.
Use on the side of the phone to adjust the volume.
To adjust the speaker volume (hands free and group listening) use on the side
of the phone.
Recall
Press the recall button RECALL followed by the extension number to transfer calls
when connected to a PBX (TBR only). Access to additional network services can be
gained by using the recall button RECALL, and keys. Contact your network
* #
operator for more information.

Mute button

The handset/headset/hands free microphone can be disconnected during a call by
pressing MUTE. Press MUTE once more to reactivate the microphone.
The MUTE LED will illuminate while the function is active.